> For the complete documentation index, see [llms.txt](https://docs.editran.onesait.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.editran.onesait.com/documentacion-editran/ibm-editran-v5.3-cics-en/tcp/os390-v2r5-v2r6.-procedures-and-files.md).
# OS390 V2R5-V2R6. Procedures and files
## TCP startup procedure OS390-V2R5-6
```cobol
000001 //TCPIPB PROC PARMS='CTRACE(CTIEZB00)'
000003 //* Communication Server/390
000004 //* SMP/E Distribution Name: EZAEB01G
000006 //* 5647-A01 (C) Copr. IBM Corp. 1991,1997.
000007 //* All rights reserved.
000008 //* US Government Users Restricted Rights -
000009 //* Use, duplication or disclosure restricted
000010 //* by GSA ADP Schedule Contract with IBM Corp.
000011 //* See IBM Copyright Instructions
000014 //TCPIP EXEC PGM=EZBTCPIP,
000015 // PARM='&PARMS',
000016 // REGION=32M,TIME=1440
000018 //* The C runtime libraries should be in the system's link list
000019 //* or add them via a STEPLIB definition here. If you add
000020 //* them via a STEPLIB, they must be APF authorized with DISP=SHR
000022 //STEPLIB DD DSN=TCPIP.SEZALINK,DISP=SHR
000023 // DD DSN=TCPIP.SEZALNK2,DISP=SHR
000025 //* SYSPRINT contains run-time diagnostics from TCPIP. It may be
000026 //* a data set or SYSOUT.
000027 //* ALGPRINT contains run-time diagnostics from TCPIP's Autolog
000028 //* task. It should be SYSOUT.
000029 //* SYSERROR contains error messages from TCPIP that occurred
000030 //* while processing the PROFILE.
000031 //*
000032 //SYSPRINT DD SYSOUT=*,DCB=(RECFM=FB,LRECL=137,BLKSIZE=137)
000033 //ALGPRINT DD SYSOUT=*,DCB=(RECFM=FB,LRECL=137,BLKSIZE=137)
000034 //SYSOUT DD SYSOUT=*,DCB=(RECFM=FB,LRECL=137,BLKSIZE=137)
000035 //CEEDUMP DD SYSOUT=*,DCB=(RECFM=FB,LRECL=137,BLKSIZE=137)
000036 //SYSERROR DD SYSOUT=*
000037 //*
000038 //* TNDBCSCN is the configuration data set for TELNET DBCS
000039 //* transform mode.
000040 //*
000041 //*TNDBCSCN DD DSN=SW.TCPIP.SEZAPARM(TNDBCSCN),DISP=SHR
000043 //* TNDBCSXL contains binary DBCS translation table codefiles
000044 //* used by TELNET DBCS Transform mode.
000045 //*
000046 //*TNDBCSXL DD DSN=TCPIP.SEZAXLD2,DISP=SHR
000048 //* TNDBCSER receives debug output from TELNET DBCS Transform
000049 //* mode, when TRACE TELNET is specified in the PROFILE data set.
000050 //*
000051 //*TNDBCSER DD SYSOUT=*
000053 //* TCPIP reads the parameters from a data set with name
000054 //* TCPIP.nodename.TCPIP or with name TCPIP.PROFILE.TCPIP.
000055 //* See the chapter on "Configuring the TCPIP Address Space" in
000056 //* the Configuration Guide for more information. A sample of
000057 //* such a profile is included in member SAMOPROF of the
000058 //* SEZAINST data set.
000059 //*
000060 //PROFILE DD DISP=SHR,DSN=SW.TCPIP.SEZAPARM(CPUBPROF)
000062 //* SYSTCPD explicitly identifies which data set is to be
000063 //* used to obtain the parameters defined by TCPIP.DATA.
000064 //* The SYSTCPD DD statement should be placed in the TSO logon
000065 //* procedure or in the JCL of any client or server executed
000066 //* as a background task. The data set can be any sequential
000067 //* data set or a member of a partitioned data set (PDS).
000068 //*
000069 //* For more information please see "Understanding TCP/IP Data
000070 //* Set Names" in the Configuration Guide.
000071 //*
000072 //SYSTCPD DD DSN=SW.TCPIP.SEZAPARM(TCPDATAB),DISP=SHR
****** **************************** Bottom of Data ****************************
```
## OS390 V2R5-6 profile file.
```
BROWSE SW.TCPIP.SEZAPARM(CPUBPROF) - 01.12 Line 00000000 Col 001 080
Command ===> Scroll ===> CSR
********************************* Top of Data **********************************
;
; TCPIP.PROFILE.TCPIP
; ===================
;
; COPYRIGHT = NONE.
;
; This is a sample configuration file
; for the TCPIP address space.
;
; NOTES:
;
; The device configuration statements MUST be changed to match your
; hardware and software configuration.
;
; The BEGINVTAM section must be changed to match your VTAM
; configuration.
;
;
; For more information about this file, see "Configuring the TCPIP
; Address Space" and "Configuring the Telnet Server" in the
; Configuration Guide.
;
; ----------------------------------------------------------------------
;
;
; ----------------------------------------------------------------------
;
; Flush the ARP tables every 20 minutes.
;
ARPAGE 20
;
; You can specify DATASETPREFIX in the PROFILE.TCPIP but it no longer
; has any affect on the TCP/IP stack.
;
; ----------------------------------------------------------------------
;
; Set Telnet time-out to 10 minutes.
;
TELNETPARMS
PORT 23
INACTIVE 600
TIMEMARK 600
SCANINTERVAL 120
SMFINIT STD
SMFTERM STD
WLMCLUSTERNAME TN3270E ENDWLMCLUSTERNAME
ENDTELNETPARMS
; ----------------------------------------------------------------------
;
; AUTOLOG the following servers.
;
AUTOLOG 5
; FTPD JOBNAME FTPD1 ; FTP Server
; FTPDB ; FTP Server of CPU-B
; LPSERVE ; LPD Server
; NAMESRV ; Domain Name Server
; NCPROUT ; NCPROUTE Server
; PORTMAP ; Portmap Server
; OROUTED ; RouteD Server
; RXSERVE ; Remote Execution Server
; SMTP ; SMTP Server
; OSNMPD ; SNMP Agent Server
; SNMPQE ; SNMP Client
; TCPIPX25 ; X25 Server
; SAMSPROC ; SAMS VANTAGE server
ENDAUTOLOG
;
; ----------------------------------------------------------------------
;
; Reserve ports for the following servers.
;
; NOTES:
;
; A port that is not reserved in this list can be used by any user.
; If you have TCP/IP hosts in your network that reserve ports
; in the range 1-1023 for privileged applications, you should
; reserve them here to prevent users from using them.
;
; The port values below are from RFC 1060, "Assigned Numbers."
;
PORT
7 UDP MISCSERV ; Miscellaneous Server
7 TCP MISCSERV
9 UDP MISCSERV
9 TCP MISCSERV
19 UDP MISCSERV
19 TCP MISCSERV
20 TCP FTPDB NOAUTOLOG ; FTP Server
21 TCP FTPDB ; FTP Server
; 20 TCP OMVS NOAUTOLOG ; FTP Server
; 21 TCP FTPD1 ; FTP Server
23 TCP INTCLIEN ; Telnet Server
25 TCP SMTP ; SMTP Server
53 TCP NAMESRV ; Domain Name Server
53 UDP NAMESRV ; Domain Name Server
111 TCP PORTMAP ; Portmap Server
111 UDP PORTMAP ; Portmap Server
135 UDP LLBD ; NCS Location Broker
161 UDP OSNMPD ; SNMP Agent
162 UDP SNMPQE ; SNMP Query Engine
512 TCP RXSERVE ; Remote Execution Server
514 TCP RXSERVE ; Remote Execution Server
515 TCP LPSERVE ; LPD Server
520 UDP OROUTED ; RouteD Server
580 UDP NCPROUT ; NCPROUTE Server
750 TCP MVSKERB ; Kerberos
750 UDP MVSKERB ; Kerberos
751 TCP ADM@SRV ; Kerberos Admin Server
751 UDP ADM@SRV ; Kerberos Admin Server
777 UDP SAMSPROC ; SAMS VANTAGE Server
7777 TCP CICSSITD ; CICS Socket NOT REQUIRED
KEEPALIVEOPTIONS
INTERVAL 2
ENDKEEPALIVEOPTIONS
;
; ----------------------------------------------------------------------
;
; Hardware definitions:
;
; NOTE: To use these device and link statements, update the statements
; to reflect your installation configuration and remove the semicolon
;
;
; LOSAB4 osa2 with a Token-Ring and Ethernet adapter.
;
DEVICE LOSAB4 LCS 1002
LINK OSAB4TCP IBMTR 0 LOSAB4
;LINK ETH1 ETHERNET 1 LCS1
;
; LCS2 is a 3172 Model 2 with a FDDI adapter.
;
;DEVICE LCS2 LCS BE0
;LINK FDDI1 FDDI 0 LCS2
;
; SNALU0 is an SNA Link.
;
;DEVICE SNALU0 SNAIUCV SNALINK LU000000 SNALINK
;LINK SNA1 IUCV 1 SNALU0
;
; ----------------------------------------------------------------------
;
; HOME Internet (IP) addresses of each link in the host.
;
; NOTE: To use this home statement, update the ipaddress and linknames
; to reflect your installation configuration and remove the semicolon
;
HOME
192.168.172.088 OSAB4TCP
;
; ---------------------------------------------------------------------
;
; The PRIMARYINTERFACE statement is used to specify which interface
; is the primary interface.
;
; If PRIMARYINTERFACE is not specified, then the first link in the HOME
; statement is the primary interface, as usual.
;
; NOTE: To use this primary statement, update the and linkname
; to reflect your installation configuration and remove the semicolon
;
PRIMARYINTERFACE OSAB4TCP
;
; ----------------------------------------------------------------------
;
; IP routing information for the host. All static IP routes should
; be added here.
;
; NOTE: To use this GATEWAY statement, update the addresses and links
; to reflect your installation configuration and remove the semicolon
;
GATEWAY
;
; Direct Routes - Routes that are directly connected to my interfaces.
;
; Network First Hop Link Name Packet Size Subnet Mask Subnet Value
192.168.172 = OSAB4TCP 1500 0
;
; Indirect Routes - Routes that are reachable through routers on my
; network.
;
; Network First Hop Link Name Packet Size Subnet Mask Subnet Value
; 193.12.2 130.50.10.1 TR1 2000 0
; 10.5.6.4 193.5.2.10 ETH1 1500 HOST
;
; Default Route - All packets to an unknown destination are routed
; through this route.
;
; Network First Hop Link Name Packet Size Subnet Mask Subnet Value
DEFAULTNET 192.168.172.254 OSAB4TCP DEFAULTSIZE 0
;
; ----------------------------------------------------------------------
;
; orouted Routing Information
;
; if you are using orouted, comment out the GATEWAY statement and
; update the BSDROUTINGPARMS statement to reflect your installation
; configuration and remove the semicolon
;
; Link Maxmtu Metric Subnet Mask Dest Addr
; BSDROUTINGPARMS false
; TR1 2000 0 255.255.255.0 0
; ETH1 1500 0 255.255.255.0 0
; FDDI1 DEFAULTSIZE 0 255.255.255.0 0
; ENDBSDROUTINGPARMS
;
; ----------------------------------------------------------------------
;
; Use TRANSLATE to specify the hardware address of a specific IP
; address. See the Customization and Administration Guide for more
; information.
;
TRANSLATE
; A null translate statement issues the warning message EZZ0323I
;
; ----------------------------------------------------------------------
;
; Turn off all tracing. If tracing is to be used, change the following
; line. To trace the configuration component, for example, change
; the line to ITRACE ON CONFIG 1
;
ITRACE OFF
;
; ----------------------------------------------------------------------
; The ASSORTEDPARMS NOFWD will prevent the forwarding of IP packets
; between different networks. If NOFWD is not specified, IP packets
; will be forwarded between networks when this host is a gateway.
;
ASSORTEDPARMS
NOFWD
ENDASSORTEDPARMS
; NOFWD issues the informational message EZZ0334I
;
; ----------------------------------------------------------------------
;
; Define the VTAM parameters required for the Telnet server.
;
BEGINVTAM
; Define logon mode tables to be the defaults shipped with the
; latest level of VTAM
TELNETDEVICE 3278-2-E T3270PC ; 24 line screen - default of NSX32702
TELNETDEVICE 3279-2-E NSX32702 ; 24 line screen - default of NSX32702
TELNETDEVICE 3278-3-E NSX32703 ; 32 line screen - default of NSX32702
TELNETDEVICE 3279-3-E NSX32703 ; 32 line screen - default of NSX32702
TELNETDEVICE 3278-4-E NSX32704 ; 48 line screen - default of NSX32702
TELNETDEVICE 3279-4-E NSX32704 ; 48 line screen - default of NSX32702
TELNETDEVICE 3278-5-E NSX32705 ; 132 column screen - default of NSX327
TELNETDEVICE 3279-5-E NSX32705 ; 132 column screen - default of NSX327
; Define the LUs to be used for general users.
DEFAULTLUS
TCP00001 TCP00002 TCP00003 TCP00004 TCP00005
TCP00006 TCP00007 TCP00008 TCP00009 TCP00010
ENDDEFAULTLUS
LUSESSIONPEND ; On termination of a Telnet server connection,
; the user will revert to the DEFAULTAPPL
DEFAULTAPPL TUBESB ; Set the default application for all Telnet
; sessions to allow CLSDST Pass
; LINEMODEAPPL TSB ; Send all line-mode terminals directly to TSO.
; ALLOWAPPL SAMON QSESSION ; SAMON appl does CLSDST Pass to next appl
; ALLOWAPPL TSO* DISCONNECTABLE ; Allow all users access to TSO
; applications.
; TSO is multiple applications all beginning with TSO,
; so use the * to get them all. If a session is closed,
; disconnect the user rather than log off the user.
; RESTRICTAPPL IMS ; Only 3 users can use IMS.
; USER USER1 ; Allow user1 access.
; LU TCPIMS01 ; Assign USER1 LU TCPIMS01.
; USER USER2 ; Allow user2 access from the default LU pool.
; USER USER3 ; Allow user3 access from 3 Telnet sessions,
; each with a different reserved LU.
; LU TCPIMS31 LU TCPIMS32 LU TCPIMS33
ALLOWAPPL * ; Allow all applications that have not been
; previously specified to be accessed.
; Map Telnet sessions from this node to display USSAPC screen.
; USSTAB USSAPC 130.50.10.1
;
; Map Telnet sessions from this link to display USSCBA screen.
USSTCP USSNPAS2 OSAB4TCP
ENDVTAM
;
; ----------------------------------------------------------------------
;
; Start all the defined devices.
;
; NOTE: To use these START statements, update the device name
; to reflect your installation configuration and remove the semicolon
;
START LOSAB4
; START LCS2
; START SNALU0
******************************** Bottom of Data ********************************
```
The differences between OS390 V2R5 and V2R6 are in the TCPCONFIG and UDPCONFIG sub-parameters:
```
PARAMETER OS390 V2R5 MINIMUM MAXIMUM DEFAULT
Tcp_send_buffer_size 256 256K 16384 (16K)
Tcp_receive_buffer_size 256 256K 16384 (16K)
Udp_send_buffer_size 1 65535 65535
Udp_receive_buffer_size 1 65535 65535
PARAMETER OS390 V2R6 MINIMUM MAXIMUM DEFAULT
Tcp_send_buffer_size 256 256K 16384 (16K)
Tcp_receive_buffer_size 256 tcp_max_receive_buffer_size 16384 (16K)
Tcp_max_receive_buffer_size tcp_receive_buffer_size 512K 256K
Udp_send_buffer_size 1 65507 65507
Udp_receive_buffer_size 1 65507 65507
```
Starting with editran 5.1, it is possible to configure the send and receive buffers in the product panels.
## TCPDATA file OS390 V2R5-6
```
BROWSE SW.TCPIP.SEZAPARM(TCPDATAB) - 01.12 Line 00000000 Col 001 080
Command ===> Scroll ===> CSR
********************************* Top of Data **********************************
;
;***********************************************************************
; *
; Name of Data Set: TCPIP.DATA *
; *
; COPYRIGHT = NONE. *
; *
; This data, TCPIP.DATA, is used to specify configuration *
; information required by TCP/IP client programs. *
; *
; *
; Syntax Rules for the TCPIP.DATA configuration data set: *
; *
; (a) All characters to the right of and including a ; will be *
; treated as a comment. *
; *
; (b) Blanks and are used to delimit tokens. *
; *
; (c) The format for each configuration statement is: *
; *
; keyword value *
; *
; where is an optional label that can be *
; specified before a keyword; if present, then the keyword- *
; value pair will only be recognized if the SystemName matches *
; the node name of the system, as defined in the IEFSSNxx *
; PARMLIB member. This optional label permits configuration *
; information for multiple systems to be specified in a single *
; TCPIP.DATA data set. *
; *
; NOTE: You should define the SystemName in the IEFSSNxx *
; PARMLIB member to be the same as your JES2 or JES3 *
; node name. This is required for correct delivery of *
; SMTP mail. *
; *
;***********************************************************************
; TCPIPJOBNAME specifies the name of the started procedure that was
; used to start the TCPIP address space. TCPIP is the default.
;
TCPIPUSERID TCPIPB
TCPIPJOBNAME TCPIPB
;
; HOSTNAME specifies the TCP host name of this system. If not
; specified, the default HOSTNAME will be the node name specified
; in the IEFSSNxx PARMLIB member.
;
; For example, if this TCPIP.DATA data set is shared between 2
; systems, OURMVSNAME and YOURMVSNAME, then the following 2 lines
; will define the HOSTNAME correctly on each system.
;
;OURMVSNAME: HOSTNAME OURTCPNAME
;YOURMVSNAME: HOSTNAME YOURTCPNAME
;
HOSTNAME OS390B
;
; DOMAINORIGIN specifies the domain origin that will be appended
; to host names passed to the resolver. If a host name contains
; any dots, then the DOMAINORIGIN will not be appended to the
; host name.
;
DOMAINORIGIN TEL.INDRA.ES
;
; NSINTERADDR specifies the IP address of the name server.
; LOOPBACK (127.0.0.1) specifies your local name server. If a name
; server will not be used, then do not code an NSINTERADDR statement.
; (Comment out the NSINTERADDR line below). This will cause all names
; to be resolved via site table lookup.
;
;NSINTERADDR 127.0.0.1
NSINTERADDR 172.29.2.41 (DNS SERVER)
NSINTERADDR 192.168.1.30 (DNS SERVER)
;
; NSPORTADDR specifies the foreign port of the name server.
; 53 is the default value.
;
NSPORTADDR 53
;
; RESOLVEVIA specifies how the resolver is to communicate with the
; name server. TCP indicates use of TCP virtual circuits. UDP
; indicates use of UDP datagrams. The default is UDP.
;
RESOLVEVIA TCP
;
; RESOLVERTIMEOUT specifies the time in seconds that the resolver
; will wait to complete an open to the name server (either UDP or TCP).
; The default is 30 seconds.
;
RESOLVERTIMEOUT 30
;
; RESOLVERUDPRETRIES specifies the number of times the resolver
; should try to connect to the name server when using UDP datagrams.
; The default is 1.
;
RESOLVERUDPRETRIES 1
;
; TRACE RESOLVER will cause a complete trace of all queries to and
; responses from the name server or site tables to be written to
; the user's console. This command is for debugging purposes only.
;
; TRACE RESOLVER
;
;
; You can specify DATASETPREFIX in the PROFILE.TCPIP and TCPIP.DATA
; data sets. The character string specified as a parameter on
; DATASETPREFIX takes precedence over both the distributed or modified
; data set prefix name as changed by the EZAPPRFX installation job.
; If this statement is used in a profile or configuration
; data set that is allocated to a client or a server, then
; that client or server dynamically allocates additional required data
; sets using the value specified for DATASETPREFIX as the data set name
; prefix. The DATASETPREFIX parameter can be up to 26 characters long
; and the parameter must NOT end with a period.
;
; For more information please see "Understanding TCP/IP Data Set
; Names" in the Customization and Administration Guide.
;
DATASETPREFIX TCPIP
;
;
; MESSAGECASE MIXED indicates to the FTP server, FTP client, TELNET
; client, and PING client that all messages should be displayed in
; mixed case. MESSAGECASE UPPER indicates to the FTP server, FTP
; client, TELNET client, and PING client that all messages should
; be displayed in uppercase. Mixed case inserts in messages will
; will not be uppercased.
; If MESSAGECASE is not specified, mixed case messages will be used.
;
; MESSAGECASE MIXED
; MESSAGECASE UPPER
;
; LOADDBCSTABLES indicates to the FTP server and FTP client which DBCS
; translation tables should be loaded at initialization time. Remove
; from the list any tables that are not required. If LOADDBCSTABLES is
; not specified, no DBCS tables will be loaded.
;
; LOADDBCSTABLES JIS78KJ JIS83KJ SJISKANJI EUCKANJI HANGEUL KSC5601
; LOADDBCSTABLES TCHINESE BIG5 SCHINESE
;***********************************************************************
;
; End of file.
;
******************************** Bottom of Data ********************************
```
NOTE: In OS390 2.6 it adds only one parameter compared to 2.5 (TRACE SOCKET)
## Startup of CICS OS390-V2R5-6.
```cobol
********************************* TOP OF DATA **********************************
1 //CICSSITD JOB (EXPL,EXA,1439,200),SYSTEMS,CLASS=G,TIME=1439,
// MSGLEVEL=(1,1),USER=SITD,
// MSGCLASS=H
//*************************************************
//* C. I. C. S. T E S T S I T E *
//* *
//* SNCE - COBOL II AMODE(31) *
//* EDIREAL - COBOL II AMODE(31) *
//* EDITRAN - COBOL II AMODE(31) *
//*************************************************
2 //CICSD EXEC PGM=DFHSIP,TIME=1439,REGION=32M,
// PARM='SIT=SP,START=COLD'
//*
//*
//* STEPLIB DD DSN=CEE.SCEERUN,DISP=SHR
3 //STEPLIB DD DSN=DB2.V3R1M0.SDSNLOAD,DISP=SHR
4 // DD DSN=CICS410.SDFHAUTH.SITO,DISP=SHR
XX DD DSN=TCPIP.DESA.SEZALINK,DISP=SHR
//*
//********************************************************
//* LOADABLE MODULE LIBRARIES *
//********************************************************
5 //DFHRPL DD DSN=CEE.SCEECICS,DISP=SHR
6 // DD DSN=CEE.SCEERUN,DISP=SHR
7 // DD DSN=CICS410.SDFHLOAD.SITO,DISP=SHR
8 // DD DSN=CICS410.SDFHEXCI.SITO,DISP=SHR
9 // DD DSN=KI.SGDC.SSASST.LOAD7003,DISP=SHR
10 // DD DSN=KI.SGDC.SSASST.LOADEURO,DISP=SHR 3
11 // DD DSN=KI.SGDC.DSO.LOADV1R0,DISP=SHR 1
12 // DD DSN=KI.EGDC.LOADINCI,DISP=SHR 1
13 // DD DSN=KI.EGDC.ZTBP.LOAD,DISP=SHR 1
14 // DD DSN=KI.SGDC.SSASST.LOADV1R0,DISP=SHR 16
15 // DD DSN=KI.EGDC.EDI.LOAD31,DISP=SHR
16 // DD DSN=KI.EGDC.INT.LOAD,DISP=SHR 13
17 // DD DSN=CICS410.SIST.MODULOS,DISP=SHR 1
18 // DD DSN=KI.GCDA.CIFRADO.LOAD,DISP=SHR 16
19 // DD DSN=KI.EGDC.APL.LOAD31,DISP=SHR 16
20 // DD DSN=KI.EGDC.ZTBP.LOAD31,DISP=SHR 10
21 // DD DSN=KI.SGDC.SNPACH.LOADV1R0,DISP=SHR 7
22 // DD DSN=SYS1.SYSVIEW.V72.LOADLIB,DISP=SHR 1
23 // DD DSN=KI.EIDC.ZTBG.LOAD.VSE,DISP=SHR
24 // DD DSN=CW.LOAD,DISP=SHR
25 // DD DSN=TCPIP.SEZATCP,DISP=SHR
//********************************************************
//* RESTART FILES *
//********************************************************
//*
26 //DFHRSD DD DSN=CICS410.DFHRSD.SITD,DISP=SHR
27 //DFHGCD DD DSN=CICS410.DFHGCD.SITD,DISP=SHR
28 //DFHLCD DD DSN=CICS410.DFHLCD.SITD,DISP=SHR
29 //DFHJ01A DD DSN=CICS410.JOURNAL1.SITD,DISP=SHR
//*
//********************************************************
//* DUMP FILES *
//********************************************************
30 //DFHDMPA DD DSN=CICS410.DFHDMPA.SITD,DISP=SHR
31 //DFHDMPB DD DSN=CICS410.DFHDMPB.SITD,DISP=SHR
//***********************************************************
32 //COUT DD SYSOUT=*,DCB=(RECFM=V,LRECL=132,BLKSIZE=136)
33 //SALIDA DD SYSOUT=*,DCB=(RECFM=V,LRECL=128,BLKSIZE=136)
34 //CSDLOG DD SYSOUT=*,DCB=(RECFM=V,LRECL=120,BLKSIZE=128)
35 //CEEMSG DD SYSOUT=*,DCB=(RECFM=V,LRECL=161,BLKSIZE=165)
36 //CEEOUT DD SYSOUT=*,DCB=(RECFM=V,LRECL=133,BLKSIZE=137)
//**********************************************************
//* C.I.C.S. FILES *
37 //DMPTABLA DD DSN=CICS410.DMPTABLA.SITD,DISP=SHR
//*
38 //DFHINTRA DD DSN=CICS410.DFHINTRA.SITD,DISP=SHR
39 //DFHTEMP DD DSN=CICS410.DFHTEMP.SITD,DISP=SHR
40 //DFHCSD DD DSN=CICS410.DFHCSD.SITD,DISP=SHR
//********************************************************
//* TD QUEUE *
//********************************************************
//*
41 //DDEITD DD DSN=KI.EIDC.EITD,DISP=SHR
42 //NXC1INTR DD SYSOUT=(A,INTRDR)
43 //NXCEINTR DD SYSOUT=(A,INTRDR)
//*
//********************************************************
//* TRACE FILES *
//********************************************************
//*
44 //DFHAUXT DD DSN=KI.SNCE.TRACE.SITD,DISP=SHR
//*
45 //EDI1INTR DD SYSOUT=(A,INTRDR)
46 //ZTB1INTR DD SYSOUT=(A,INTRDR)
47 //ZTB2INTR DD DSN=KI.EIDC.ZTBG.INTR,DISP=MOD
48 //ZTB1INTR DD SYSOUT=(A,INTRDR)
//********************************************************************
49 //TCPCICS DD SYSOUT=H,DCB=(DSORG=PS,RECFM=V,BLKSIZE=136)
50 //SYSTCPD DD DSN=SW.TCPIP.SEZAPARM(TCPDATAB),DISP=SHR
//********************************************************************
//*
//* S E Q U E N T I A L T E R M I N A L S S I T O
//*
//********************************************************************
//*
//*
51 //CIEG1 DD UNIT=VIO,SPACE=(TRK,1)
52 //CIEG2 DD UNIT=VIO,SPACE=(TRK,1)
99 //UNIG1 DD UNIT=VIO,SPACE=(TRK,1)
100 //UNIG2 DD UNIT=VIO,SPACE=(TRK,1)
//********************************************************************
//*
//* S E Q U E N T I A L T E R M I N A L S E D I T R A N
//*
//********************************************************************
//*
//*
101 //DATSI DD DSN=KI.SNCE.CICSSITD.DATSI,DISP=SHR
102 //DATSO DD DSN=KI.SNCE.CICSSITD.DATSO,DISP=SHR
103 //BATCI DD DSN=KI.SNCE.CICSSITD.BATCI,DISP=SHR
104 //BATCO DD DSN=KI.SNCE.CICSSITD.BATCO,DISP=SHR
105 //CBC1I DD UNIT=VIO,SPACE=(TRK,1)
106 //CBC1O DD UNIT=VIO,SPACE=(TRK,1)
//*
//*-------------------------------------------------------
//* SYSVIEW 7.2 FILES *
//*-------------------------------------------------------
//*
107 //XPFCDUMP DD SYSOUT=*
108 //XPFCLOG DD SYSOUT=*
109 //XPFCPARM DD DSN=CA.SYSVIEW.V72.PARMLIB,DISP=SHR
******************************* BOTTOM OF DATA ********************************
```
The SYSTCPD tab points to TCPDATA and is essential if we want to connect via DNS.
The LE370 libraries must be ahead of the TCP libraries.
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:
```
GET https://docs.editran.onesait.com/documentacion-editran/ibm-editran-v5.3-cics-en/tcp/os390-v2r5-v2r6.-procedures-and-files.md?ask=&goal=
```
`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.